水針
Hydro-Acupuncture
操作方法 Manipulation
病人取適宜的體位，選擇所需的注射器和針頭，插好藥物，穴位局部消毒、右手持注射器，對準腧穴（或陽性反應物)，快速刺入，緩慢進針，得氣后回抽無血，即可將藥液注入。一般疾病用中等速度注入，急癥、實熱證注入宜速；慢性病、虛寒證注入宜緩。如藥液多，可由深到淺，邊退針邊推藥，或將針更換幾個方向推藥。醫(yī)學 全在.線提供
In the treatment, select the night syringe and syringe needle, draw the injection into the syringe, disinfect the locations to be injected on the patient who is on an appropriate position for the injection. Puncture rapidly the syringe held with the right hand into the point (or the reactionary mass), then the needle is gradually inserted deeper, after the needling sensation occurs, withdraw the handle of the syringe a little bit to see whether blood is withdrawn into to the tube or not, if not inject the solution into the point. In general, moderate speed of injection is adopted. For acute and excessive heat syndromes rapid injection is indicated and for chronic and deficient syndromes, the injection should be slow. In case a big amount of solution is injected, it should be injected into the point in a few steps, from the deep to the superficial, or the syringe needle can be inserted in a few directions from the punctured point to inject the solution.
